(Your shopping cart is empty)









ENTER EMAIL ADDRESS:

You are here: Home > Toyota > Tacoma > SST Lift Kits (Lifts Front and Rear)
Sort By
1
ReadyLift 2005-2012 Toyota Tacoma and PreRunner 3" Front, 1" Rear Lift Kit -- 69-5055
ReadyLift 2005-2012 Toyota Tacoma and PreRunner 3" Front, 1" Rear Lift Kit -- 69-5055
Sale Price: $339.95

NOTE: 2011-2013 Tacoma applications: Toyota made minor changes to the Tacoma upper control arm suspension geometry. In some cases adding a leveling kit MAY affect the ability to correct the caster alignment to within factory specifications. If you have a 2011-2013 Tacoma with a leveling kit and the caster alignment specs cannot be put back to factory your truck will require an aftermarket upper control arm with adjustable caster/camber.

Note: 2013-UP (and some 2012 models) Tacoma TRD/Rock Warrior models may require purchase of kit 69-5112 if equipped with larger diameter sway bar.

Features & Benefits

  • Will never wear, break or fail - Guaranteed
  • Toughest finish - Guaranteed
  • Safest way to lift - Guaranteed
  • Maintains your factory ride -- Guaranteed
  • Includes OEM Style cast iron rear lift blocks protected by black E-coating to last the life of your Toyota Tacoma
  • Differential drop brackets provided for use with 4WD models to lower the differential and maintain factory CV angles
  • Steel upper strut extensions are the strongest on the market and are designed to position the strut alignment properly with the control arm and upper frame mount
more info
ReadyLift 2005-2016 Toyota Tacoma 5-Lug 2.75" Front, 1.75" Rear Lift Kit -- 69-5510
ReadyLift 2005-2016 Toyota Tacoma 5-Lug 2.75" Front, 1.75" Rear Lift Kit -- 69-5510
Sale Price: $339.95

ReadyLift 69-5510 Features
  • Keeps your factory ride - Guaranteed
  • Will never wear, break or fail - Guaranteed
  • Toughest finish - Guaranteed
  • Safest way to lift - Guaranteed
more info
ReadyLift 2005-2012 Toyota Tacoma and PreRunner 2.75"-3.0" Front, 2" Rear Lift Kit -- 69-5056
ReadyLift 2005-2012 Toyota Tacoma and PreRunner 2.75"-3.0" Front, 2" Rear Lift Kit -- 69-5056
Sale Price: $349.95

NOTE: 2011-2014 Tacoma applications: Toyota made minor changes to the Tacoma upper control arm suspension geometry. In some cases adding a leveling kit MAY affect the ability to correct the caster alignment to within factory specifications. If you have a 2011-2014 Tacoma with a leveling kit and the caster alignment specs cannot be put back to factory your truck will require an aftermarket upper control arm with adjustable caster/camber.

* Note: 2013-UP (and some 2012 models) Tacoma TRD/Rock Warrior models may require purchase of kit 69-5212 if equipped with larger diameter sway bar.

Features & Benefits

  • Will never wear, break or fail - Guaranteed
  • Toughest finish - Guaranteed
  • Safest way to lift - Guaranteed
  • Maintains your factory ride -- Guaranteed
  • Includes new 2.0" tapered pinion angle corrected OEM Style cast iron rear lift blocks protected by black E-coating to last the life of your Toyota Tacoma. These taller blocks help to better level the TRD equipped trucks.
  • Differential drop brackets provided for use with 4WD models to lower the differential and maintain factory CV angles
  • Steel upper strut extensions are the strongest on the market and are designed to position the strut alignment properly with the control arm and upper frame mount
more info
2012-2016 Toyota Tacoma TRD / SR5 / Rock Warrior - 3.0"F-1.0"R SST Lift Kit  -- 69-5112
2012-2016 Toyota Tacoma TRD / SR5 / Rock Warrior - 3.0"F-1.0"R SST Lift Kit -- 69-5112
Sale Price: $359.95

NOTE: 2011-2016 Tacoma applications: Toyota made minor changes to the Tacoma upper control arm suspension geometry. In some cases adding a leveling kit MAY affect the ability to correct the caster alignment to within factory specifications. If you have a 2011-2016 Tacoma with a leveling kit and the caster alignment specs cannot be put back to factory your truck will require an aftermarket upper control arm with adjustable caster/camber.

Features & Benefits

  • Will never wear, break or fail - Guaranteed
  • Toughest finish Guaranteed
  • Safest way to lift - Guaranteed
  • Maintains your factory ride -- Guaranteed
  • Includes new 1.0" tapered pinion angle corrected OEM Style cast iron rear lift blocks protected by black E-coating to last the life of your Toyota Tacoma
  • Differential drop brackets provided for use with 4WD models to lower the differential and maintain factory CV angles
  • Steel upper strut extensions are the strongest on the market and are designed to position the strut alignment properly with the control arm and upper frame mount
  • Professional installation time is estimated at two to three hours. An alignment will be necessary upon completion of installing the kit. Like all other ReadyLift kits, the 2005-2015 Six-lug Tacoma/Prerunner lift kit is guaranteed for life against manufacturing defects.

    Allows for up to a 33 x 11.5 tire on an 8" wide wheel with 5" backspacing with minor trimming of the inner fender liner. 32.5" tires on and OEM or 5" backspacing wheel should fit with no trimming required.

NOTE: Our objective is to have your truck sit level or slightly below level. Each truck is different so the amount of lift achieved may vary between 2.75" and 3.0" in the front. TRD-equipped trucks often have less rake compared to a non-TRD truck. Measurements on some customers trucks have revealed as much as 1.0 difference in the factory front end height. Some earlier model Tacoma trucks came factory with a 2 leaf plus overload rear spring pack that had sagging issues. Toyota is replacing these packs with a 3+1 rear leaf pack. Trucks with 2+1 packs will want to take advantage of this new lift system that includes a 1.0" rear lift block for a complete lift wall the way around and a stance which will give approximately a .5" rear to front rake.

more info
2012-2016 Toyota Tacoma TRD / SR5 / Rock Warrior - 3.0"F-2.0"R SST Lift Kit  -- 69-5212
2012-2016 Toyota Tacoma TRD / SR5 / Rock Warrior - 3.0"F-2.0"R SST Lift Kit -- 69-5212
Sale Price: $369.95

NOTE: 2011-2016 Tacoma applications: Toyota made minor changes to the Tacoma upper control arm suspension geometry. In some cases adding a leveling kit MAY affect the ability to correct the caster alignment to within factory specifications. If you have a 2011-2015 Tacoma with a leveling kit and the caster alignment specs cannot be put back to factory your truck will require an aftermarket upper control arm with adjustable caster/camber.

Features & Benefits

  • Will never wear, break or fail - Guaranteed
  • Toughest finish Guaranteed
  • Safest way to lift - Guaranteed
  • Maintains your factory ride -- Guaranteed
  • Includes new 2.0" tapered pinion angle corrected OEM Style cast iron rear lift blocks protected by black E-coating to last the life of your Toyota Tacoma
  • Differential drop brackets provided for use with 4WD models to lower the differential and maintain factory CV angles
  • Steel upper strut extensions are the strongest on the market and are designed to position the strut alignment properly with the control arm and upper frame mount
  • Professional installation time is estimated at two to three hours. An alignment will be necessary upon completion of installing the kit. Like all other ReadyLift kits, the 2005-2015 Six-lug Tacoma/Prerunner lift kit is guaranteed for life against manufacturing defects.


NOTE: Our objective is to have your truck sit level or slightly below level. Each truck is different so the amount of lift achieved may vary between 2.75" and 3.0" in the front. TRD-equipped trucks often have less rake compared to a non-TRD truck. Measurements on some customers trucks have revealed as much as 1.0 difference in the factory front end height. Some earlier model Tacoma trucks came factory with a 2 leaf plus overload rear spring pack that had sagging issues. Toyota is replacing these packs with a 3+1 rear leaf pack. Trucks with 2+1 packs will want to take advantage of this new lift system that includes a 2.0" rear lift block for a complete lift wall the way around and a stance which will give approximately a .5" rear to front rake.


Allows for up to a 33 x 11.5 tire on an 8" wide wheel with 5" backspacing with minor trimming of the inner fender liner. 32.5" tires on and OEM or 5" backspacing wheel should fit with no trimming required.

more info
   
 
1

Copyright © 2007- Concours Direct Inc. All Rights Reserved.
"Your #1 Source for Leveling Suspension" is the trademarked intellectual property of Concours Direct Inc.
Built with Volusion